190
© 2022 Eaton Cummins Automated Transmission Technologies. All rights reserved.
2022.10.7
MHP/MXP/VHP/VXP Range Cylinder | Disassembly and Assembly TRSM0940
6. Align the 2 groves on the Yoke Bar and install the 2
retaining bolts through the bores on the Range Yoke
Fork.
7. Insert the piston, pushing it as far back as far as it will
go.
8. Secure the piston with the retaining nut, torque to
70-85 lb-ft (94.91-115.24 N•m).
9. Install a new gasket on the Cylinder Housing Cover
mounting surface. Install the Range cylinder cover
To Next Page
Loading...