236
© 2022 Eaton Cummins Automated Transmission Technologies. All rights reserved.
2022.10.7
Main Case Disassembly and Lubrication Tube Removal | Disassembly and Assembly TRSM0940
Main Case Disassembly
1. Remove the six cap screws fastening the Input Shaft
Bearing Cover to the Transmission Main Case.
2. Remove the Input Shaft snap ring from the Input Shaft.
3. Remove Holo Lubrication Tube
4. Remove the snap ring holding the Auxiliary Drive Gear
to the Main Shaft, remove the Auxiliary Drive Gear.
5. Remove the six cap screws fastening the bearing
retainer ring to the Main Case intermediate wall.
To Next Page
Loading...