68
© 2022 Eaton Cummins Automated Transmission Technologies. All rights reserved.
2022.10.7
MHP/MXP/VHP/VXP Auxiliary Section Removal and Disassembly | Auxiliary Section Service Procedures TRSM0940
3. Remove the 4 1/2” cap screws retaining the Splitter
Cylinder Cover.
4. Remove the Splitter cylinder cover
5. Remove both Auxiliary Counter Shaft Bearing Covers.
Note: It is helpful to mark the covers to indicate which
position they are in as they will need to be reinstalled in
the same location.
To Next Page
Loading...