Need help?Do you have a question about the Eaton MTL7761ac and is the answer not in the manual?
General safety guidelines for ATEX compliance requirements.
Installation requirements and regulations for ATEX environments.
Specific conditions for Safe Use for Zone 2 applications.
General installation guidelines and DIN-rail considerations.
Introduction to fault-finding procedures and tools for barriers.
Procedures for checking power supply and barrier resistance.
Testing the diode-return channels of specific barriers.
General safety guidelines for ATEX compliance requirements.
Installation requirements and regulations for ATEX environments.
Specific conditions for Safe Use for Zone 2 applications.
General installation guidelines and DIN-rail considerations.
Introduction to fault-finding procedures and tools for barriers.
Procedures for checking power supply and barrier resistance.
Testing the diode-return channels of specific barriers.
General| Operating Temperature | -20 to +60 °C |
|---|---|
| Mounting | DIN Rail |
| Enclosure Rating | IP20 |
| Output | 4-20 mA, HART |
| Storage Temperature | -40 to +80 °C |
| Humidity | 5 to 95% RH (non-condensing) |
| Power Dissipation | 1.2 W max |
| Weight | 150 g |
| Certifications | ATEX, IECEx, FM, CSA |
To Next Page