Transmission appearance may differ, procedure is the same.
10
Countershaft Assembly
How to Install the Countershaft Assembly
To Assemble
7. Remove the rear bearing cover and install the
retaining snap ring in the countershaft rear snap
ring groove.
8. Position a new gasket on the rear bearing cover
mounting surface and install the rear bearing
cover.
9. Apply sealant/adhesive and install the capscrews,
tighten to 35-45 Lb
f
·ft of torque.
continued
H/31-7
H/31-5
7
8, 9
To Next Page
Loading...
