Transmission appearance may differ, procedure is the same.
17
External Parts
Lube System
How to Install the Lube Supply Hoses for the Inertia Brake
Special Instructions
Make sure lube hose is not damaged.
Install the lube hose at its proper location.
Special Tools
Typical service mechanic tools
To Install
1. If previously removed, install a new oil retrictor.
Tighten to 20-30 Lb
f
·in of torque.
2. If previously removed, install new connectors.
Tighten to 15-20 Lb
f
·ft of torque.
3. Connect one lube supply hose end to the
converter housing lube port.
4. Connect the other lube supply hose end to the
inertia brake.
Final Check
Make sure air hoses are not kinked.
H/43-5
H/51-5
1, 2
4
3
To Next Page
Loading...
