Eaton TRSM0020 - Page 84

Transmission appearance may differ, procedure is the same.
43
External Parts
Torque Converter
How to Install the Filter Bypass Valve
Special Instructions
The hydralic valve must be removed.
Special Tools
Typical service mechanic tools are needed
To Install
1. Use a hex socket to install the filter bypass valve.
2. Tighten the valve to 26-32 Lb
f
·ft of torque.
Final Check
Make sure the valve is properly torqued.
How to Install the HI Pressure Relief Valve
Special Instructions
The oil filter must be removed.
Special Tools
Typical service mechanic tools are needed
To Install
1. Use a hex socket to install the HI pressure relief
valve.
2. Tighten the valve to 26-32 Lb
f
·ft of torque.
3. Install the oil filter adaptor.
H/52-5
1
H/52-7
H/50-8
3
1