Battery and 12v system
Battery Charging and Removal
• The bike should be placed on level even ground and brakes engaged and locked on.
• To remove the battery, turn the key anticlockwise to open the battery box lid. Unplug
the battery and lift using the handle.
• The battery can then be taken elsewhere to be charged.
• The battery can be charged on the bike or removed and charged elsewhere e.g.,
domestic 3 pin socket.
WARNING the charger is not water-proof.
12 Volt Electrics
• EAV Cargo has made available a 12-volt fused outlet in the front light box.
• The main 40amp fuse is located near the steering column (take care as this is 48 volts)
8
To Next Page
Loading...