Do you have a question about the EAW JFX100 and is the answer not in the manual?
Configuration | 2-Way |
---|---|
Impedance | 8 Ohms |
Dimensions | 12.5" x 19.1" x 11.6" (318 mm x 485 mm x 295 mm) |
Weight | 28 lbs (12.7 kg) |
LF Subsystem | 10" Woofer |
HF Subsystem | 1" Compression Driver |
Nominal Beamwidth (H x V) | 90° x 60° |
Coverage Pattern | 90° x 60° |
Power Handling | 1000W peak |
Maximum SPL | 124 dB peak |
Connectors | Neutrik NL4 |
Enclosure Material | Plywood |
Input Connectors | Neutrik NL4 |
Output Connectors | Neutrik NL4 |
Power | 1000W peak |
Max SPL | 124 dB peak |
Driver Configuration | 1 x 10" woofer, 1 x 1" compression driver |
Drivers | 1 x 10" woofer, 1 x 1" compression driver |
Specifies the frequency range for the loudspeaker with sensitivity variation.
Measures the sound pressure level at 1 meter for 1 watt input.
Defines the electrical impedance of the loudspeaker in full range operation.
Indicates the continuous power handling capacity of the loudspeaker.
Details the peak and long-term sound pressure levels the loudspeaker can produce.
Specifies the beamwidth of the loudspeaker's sound dispersion.
Describes the loudspeaker's construction, materials, finish, and connectors.
Provides the physical measurements of the loudspeaker in inches and millimeters.
States the net and shipping weights of the loudspeaker in pounds and kilograms.
Details the 2-way full-range design with specific driver and crossover components.
Defines the on-axis frequency response variation for the loudspeaker system.
Specifies the SPL capabilities, including on-axis sensitivity and peak output.
Outlines the amplifier power handling and nominal impedance of the loudspeaker.
Describes the enclosure construction, finish, connectors, and mounting hardware.