EasyManua.ls Logo

EAW SB1000zR User Manual

EAW SB1000zR
4 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
Eastern Acoustic Works One Main Street Whitinsville, MA 01588 tel 800 992 5013 / 508 234 6158 fax 508 234 8251 www.eaw.com
EAW products are continually improved. All specifications are therefore subject to change without notice. Part Number: RD0234 (B) SB1000zR September 2006
SB1000zR Specifications group · S
DESCRIPTION
The SB products are EAW's premium subwoofers designed for
the most demanding professional applications. A broad range of
capabilities and sizes provide the designer with selections that
can be specifically matched to their application. Top quality
drivers, engineered by EAW, provide the highest output and best
sonic performance possible for a given form factor. All SB
models are direct radiating, with optimally tuned, vented
enclosures. SB subwoofers are the choice where the best sonic
performance, highest reliability, and most robust physical
construction are required.
The legendary SB1000zR is a high output, large-format
subwoofer system with proven performance in complementing
high efficiency, full-range loudspeakers. It is designed for
portable use where the fatter-sounding output of dual 18 inch
drivers is desired. The SB1000zR's driver mounting maximizes
cone area and minimizes frontal area, providing the acoustical
performance and physical configuration well suited for creating
large subwoofer arrays. Its applications include: concert touring,
arenas, band/club PA, large houses of worship, large
auditoriums/theaters, stage/performer monitoring, drum fill
monitoring, and large dance clubs.
The SB1000zR is designed to be used with today's sophisticated
digital signal processing to optimize the LF response. EAW's MX
Series processors are recommended for the required crossover
and equalization.
Six Year Warranty.
DUAL 18 INCH SUBWOOFER
See NOTES TABULAR DATA for details, half space = floor-mounted
CONFIGURATION
Subsystem
Transducer Loading
SUB 2x 18 in cone Vented
Operating Mode
Amplifier Channels External Signal Processing
Single-amp LF1/ LF2 DSP w/1-way filter
Dual-amp LF1, LF2 DSP w/1-way filter
PERFORMANCE
1
Operating Range 28 Hz to 156 Hz
Nominal Beamwidth
Horz 360°
Vert 360°
Axial Sensitivity (SPL)
LF1/LF2 (whole space) 96 dB 28 Hz to 156 Hz
(half space) 102 dB 28 Hz to 156 Hz
Input Impedance (ohms)
Nominal Minimum
LF1/ LF2 4 3.6 @ 33 Hz
LF1, LF2 8 (each) 7.2 @ 33 Hz (each)
High Pass Filter
High Pass =>25 Hz, 12 dB/octave Butterworth
Accelerated Life Test
2
System LF1/LF2 75 V 1400 W @ 4 ohm
LF1, LF2 75 V (each) 700 W @ 8 ohm (each)
Transducer (AES) 1000 W (each)
Calculated Axial Output Limit (SPL)
Average Peak
LF1/LF2 (whole space)127 dB 133 dB
(half space) 133 dB 139 dB
ORDERING DATA
Description Part Number
SB1000zR Dual 18 inch Subwoofer Black 997134
SB1000zR Dual 18 inch Subwoofer White 0000952
Optional Accessories
Fly Clip with Ring 0001386
Fly Clip with Hook 179001
1 To achieve specified performance, the listed external signal processing with EAW-provided settings is required.
2 For recommendations to select power amplifier size refer to : “HOW MUCH AMPLIFIER POWER DO I NEED?” on the EAW web site.
Question and Answer IconNeed help?

Do you have a question about the EAW SB1000zR and is the answer not in the manual?

EAW SB1000zR Specifications

General IconGeneral
TypeSubwoofer
Nominal Impedance8 ohms
Input Connectors2x Neutrik NL4 Speakon
Enclosure MaterialBaltic birch plywood
Weight132 lb (60 kg)
FinishBlack textured paint
GrillePowder-coated steel
Width22.5 in (572 mm)
Driver Size18 in (457 mm)
Enclosure TypeRear-loaded horn
Nominal Beamwidth360°

Summary

DESCRIPTION

CONFIGURATION

Subsystem

Defines the main components like transducer and loading.

Operating Mode

Specifies amplifier channels and external signal processing.

PERFORMANCE 1

Operating Range

Specifies the frequency response range of the subwoofer.

Axial Sensitivity (SPL)

Provides SPL levels at different space conditions.

Calculated Axial Output Limit (SPL)

Displays average and peak output levels.

ORDERING DATA

Description

Lists available product configurations and their part numbers.

Optional Accessories

Lists available accessories and their part numbers.

ENCLOSURE

Material

Specifies the primary material used for the enclosure.

Finish

Describes the exterior surface treatment and texture.

Grille

Details the material and type of the protective grille.

PERFORMANCE DATA

Frequency Response: Processed

Shows SPL vs. Frequency with DSP processing.

Frequency Response: Unprocessed

Shows SPL vs. Frequency without DSP processing.

Frequency Response: Digital Signal Processor

Displays DSP output frequency response.

Impedance Magnitude

Plots impedance (ohms) versus frequency.

INPUT PANEL

Signal Diagram

Illustrates signal flow for single and dual-amp modes.

NOTES

Tabular Data

Explains measurement systems, units, and data processing.

Related product manuals