EBA 430 E - Page 38

EBA 430 E • EBA 430 EP
B
C
A
-39--38-
A
B
Machine turns off:
EBA 430 E and EBA 430 EP
• Extreme load of machine (cooling phase.
Security switch (A) turns off.
About 1 minute, push the safety button (A).
• Machine blocked
• Blade is dull
Eliminate the disturbance, push the safety
button (A).
EBA 430 EP only: Safety button (B) jumps out.
• Backgauge blocked
Safety button (B) jumps out.
Eliminate disturbance, push the safety
button (B).
Does not cut through the last sheet:
• Turn or turn around the cutting stick (A),
readjust the blade by means of the blade
adjusting knob (B)
Poor cutting quality or blade stays in the
paper stack.
• change the blade (C) (see page 26-34).
All manuals and user guides at all-guides.com