13
7
Levelling
When the machine is in its location ensure it is level. Only the two front feet can be adjusted.
To alter the feet height:
Lift machine up o the floor to access the
front feet and loosen the locking nut using
the spanner provided.
1.
Adjust to the desired height by turning the
foot clockwise / anticlockwise.
2.
Ensure you re-tighten the locking nut to
secure the foot into position.
3.
Check the washing machine is level and
stable using a spirit level.
4.
x2
• Take care when moving the machine on dierent floor types.
• When handling the machine do not apply force onto the control panel area.
Always handle the machine by the side or base edges.
• Ensure locking nut is tight before use to avoid any potential machine
virbation when in use.
• Use a spirit level to ensure your washing machine is level.
Getting started
To Next Page
Loading...
Need help?
General
