Page 11
This document is proprietary. No disclosure, reproduction or use of any part thereof may be made without the expressed written
permission of Ebbco Inc. or its subsidiaries.
Section 4: System Maintenance
4.5 Work T
ank Sweeper Package
To ensure that the garnet removal system works
at the designed performance the work tank
sweeper package must be visually inspected
every 12 months. If the sweeper package is
damaged (broken eductor or piping, blocked
suction) there will be a noticeable change in
system performance. This may manifest itself as
a separator inlet pressure drop, a low differential
across the separator or a high vacuum gauge
reading. If any of these condition occur and are
not corrected the system pump and other
components will become damaged.
Once the work tank has drained of water:
• Check for damaged of broken piping and edu
ctors.
•
Check for any garnet build up in front of any edu
ctor.
• Check for any material that may be wedged between the eductor nozzle and the horn.
Ebbco In
c can provide an experience service technician to service the tank sweeper package and inspect
the complete system. Please call Ebbco for pricing and to schedule a service technician.
4.6 Abrasive bag hopper
The hopper should be visually inspected to be aware of solids level, service when full.
Horn
Nozzle
To Next Page
Loading...