Ebbco GRS-0250-B-CC - Page 13

Page 14
This document is proprietary. No disclosure, reproduction or use of any part thereof may be made without the expressed written
permission of Ebbco Inc. or its subsidiaries.
Section 6: Parts List
REC.
ON
SITE
QTY
REQ.
DELIVERY
TIME
COMPONENT
DESCRIPTION
LOCATION OF PART
ON SYSTEM
PART NUMBER
N/A 1 2-4 weeks Centrifugal separator On separator support
frame.
SDS-0250-B
N/A 1 2-4 weeks Complete pump On pump base. PCL2x3-10-B-CC+6
1 1 2-4 weeks Pump impeller Inside pump impeller
housing.
PCL2x3-10-B-CC+6-
IMP.10”
1 1 Stock
2-5 days
Pump case gaskets Inside pump impeller
housing.
61115
1 1 Stock
2-5 days
Pump strainer basket's
internal basket
Inside pump suction
strainer.
PKG-98-IB-SS
1 1 Stock
2-5 days
Pump strainer basket's lid
gasket
On suction basket lid. U9-46
2 2 Stock
2-5 days
0-60 psi liquid filled pressure
gauge
Separator inlet/outlet. GRS-60-GA
1 1 Stock
2-5 days
Vacuum gauge -30 in/mg
0PSI
On side of pump
suction strainer basket.
GRS-V-GA
N/A 1 Stock
2-5 days
Abrasive bag hopper bag In abrasive bag hopper. GRS-ABH-B
12 12 Stock
2-5 days
3/8" poly eductor End of clean discharge
in system tank.
0MP