18
i) Date Alarm (SDA)
You can program a reminder alarm to go off
on a specific date. On this day, an alarm
will go off for about 10 minutes on every
hour starting at 8:00 a.m. until you press
any button.
When the device is switched off and the
date and time appear in the display in alter-
nation:
Press the button MODE until the date
blinks in alternation with SDA in the
display.
Press one of the TUNING buttons brie-
fly to set the SDA date by day.
Hold one of the TUNING buttons pres-
sed to change the SDA date in 10-day
steps.
Once an SDA alarm has been programmed,
you can only deactivate it by repeating the
configuration steps and programming in a
date that is long past.
9. Miscellaneous
To lock the buttons against accidental
operation, hold the button KEY-LOCK
pressed for 5 seconds until KEY LOCK
appears in the display.
If you hold down the button again, the
lock is removed.
Fold out the prop to set the device at
an incline.
To Next Page
Loading...
