USE AND CARE FOR CATALOG NUMBER:
- E6003.00 Shaker Power Unit
Variable Speed 60-260 rpm with Tachometer and Timer
115-230V 50/60Hz
GENERAL INFORMATION
o Handle this unit with care. Unpack and check that the contents coincide
with the packing-list. If any part is damaged or missing, please advise
the distributor immediately.
o Do not install or use this equipment without first reading this manual.
o This manual should always be attached to the equipment and made
available to all users.
o NEVER TOUCH THE RECIPRICATING PORTION OF THE SHAKER
WHILE THE UNIT IS RUNNING!!
o If you have any doubts or inquiries, please contact your supplier or
Eberbach Corporation technical service.
OPERATION
The Eberbach bench top reciprocating shaker (catalog E6003.00) features:
o A continuously variable speed range, adjustable between 60 and 260
osc/min with fixed stroke length set to 1.5” (38mm).
o A digital tachometer and programmable digital timer for simple and
accurate use.
o A maximum shaking weight of 50lbs.
See the chart on the following page for the recommended loading capacity at
various speeds.
To Next Page
Loading...