Eberg ACUM 110 - Functions & Operation; Fan Mode Selection; Fan Speed Adjustment; Oscillating Functionality

ACUM 110EN
13
www.eberg.eu
FUNCTIONS & OPERATION
Press once to activate the Fan. It will default into medium fan (normal mode).
To end operation, press once.
This button allows you to select between Low , Medium or High speeds.
The relevant icon will be displayed on screen when selected.
Activates the oscillating function. Simply press once to start. To end the oscillating
function, press this button again.
This button allows you to enter the ‘timer mode’. Press to increase the number of
hours (1 to 8) you wish the Fan to remain operational.
Normal , Natural or Sleep modes can be selected by pressing this button.
The relevant icons will be displayed on screen when selected. When used in natural
mode, the fan speed is randomly adjusted, giving the feeling of a natural breeze.
When set to Sleep Mode the fan speed decreases intermittently from high to
medium, then medium to low. When used with the timer, will ultimately switch the
unit o.
SLEEP MODE - This mode has three types of air cycles: strong, medium and soft
breeze ~ use the button to set fan speed.
1. At high setting, strong wind will operate at rst then will step down to medium
wind, to soft wind, to a halt and will return to strong wind. This cycle will carry on
continuously or until the timer switches o.
2. At medium setting, medium wind will operate at rst then will step down to soft
wind, to a halt and will return to medium wind; this cycle will continue.
3. At low setting, soft wind will operate at rst then the fan will stop and then return
to soft wind; this cycle will continue indenitely until manually powered o or the
timer duration is reached.
Negative ion function. Push the button for 3 seconds to start negative ion function.
The fan will emit negative (-) ions to help clear surrounding air.