MIRU S26PROEN
31
www.eberg.eu
STEP 5
Connect the exhaust pipe (1) to the air outlet on the back of the air conditioner through the connector (2)
previously mounted on the end of the pipe.
STEP 6
Adapt the length of the exible discharge pipe (1) to the distance between the device and the window.
Sharp bending and crushing of the pipe should be avoided. Then place the air conditioner within reach
of an electrical outlet.
STEP 7
Adjust the air outlet louvers so that they are not in the closed position. Then you can turn on the device.
To Next Page
