Why Eberg ZIBU Z26HD does not come on?
Your Eberg Air Conditioner might not be turning on due to several reasons. First, there may be no current. Second, it might not be properly plugged into the mains, so ensure it is. Finally, the internal safety device could have tripped; in this case, wait 30 minutes. If the issue persists after waiting, it means that there is a problem.
Why Eberg Air Conditioner works, but does not cool the room?
If your Eberg Air Conditioner is running but not cooling the room effectively, consider these possible causes: * Ensure that windows, doors, and curtains are closed to prevent heat from entering. * Eliminate any heat sources in the room, such as ovens or hairdryers. * Check that the air exhaust hose is correctly attached to the housing at the back of the unit. Also, the technical specification of the appliance may not be adequate for the room in which it is located.
What to do if Eberg ZIBU Z26HD works for a short time only?
If your Eberg Air Conditioner only works for a short period, it could be due to bends in the air exhaust hose. Make sure to position the air exhaust hose correctly, keeping it as short and free of curves as possible. Another cause could be something preventing the air from being discharged; check for and remove any obstacles.
General| Cooling Capacity | 26000 BTU |
|---|---|
| Power Supply | 220-240V, 50Hz |
| Refrigerant | R410A |
| Type | Split Air Conditioner |
| Noise Level | 45 dB |
Instructions for venting hot air using the exhaust hose.
How to operate the appliance using the control panel.
Details for operating the appliance in Cool mode.
Details for operating the appliance in Heat mode.
To Next Page
