Ebmpapst M3G084 - Page 9

M3G084 / M3G112 Disassembly instructions
Document no.: - • Change: 01 • Release date: 2019-02-12 • (VM-POK) • Page 2/7
ebm-papst Mulfingen GmbH & Co. KG • Bachmühle 2 • 74673 Mulfingen • Germany
Phone +49 7938 81-0 • Fax +49 7938 81-110 • info1@de.ebmpapst.com • www.ebmpapst.com
3. DISASSEMBLY
3.1. Dismantling the control system
1. Unfasten the four screws at the housing.
2. Detach the housing.
3. Set down both parts.
4. Use a screwdriver to prise out the circuit board cover.
5. Unfasten the three circuit board screws.