Need help?Do you have a question about the Ebode IR Link Pro and is the answer not in the manual?
The primary IR receiver unit for the ebode IR Link Pro system.
Central hub for connecting IR emitters and the IR receiver.
Emitter unit for sending IR signals to AV components.
Cable for direct connection to AV receivers.
12VDC adapter for powering the IR Link Pro system.
Attaching 3IREDB emitters to the IR sensor windows of components.
Plugging IR emitters into the IRHUB2 connecting block.
Connecting the IRQC cable to the hub and AV receiver.
Positioning the IRLPRO IR receiver for line-of-sight reception.
Plugging the IRLPRO IR receiver into the IRHUB2 connecting block.
Connecting the 12VDC power supply to the IRHUB2.
Verifying correct operation via the blue talk-back LED.
Repositioning receiver or emitters if interference occurs.
Checking emitter placement for optimal IR signal reception.
Details on IR bandwidth, cable length, and reception range.
Specifications for power, emitter, and receiver connection jacks.
Compliance with EU directives for electrical and electronic equipment.
Guidelines for proper disposal and recycling of electronic waste.
General| Brand | Ebode |
|---|---|
| Model | IR Link Pro |
| Category | Extender |
| Type | IR Extender |
| Power Supply | 5V DC |
| Compatibility | IR controlled devices |
| Connectivity | Wired |
| Power Source | Power adapter |
To Next Page