What to do if Ebro Data Loggers measurement range exceeded?
If the measurement range is exceeded when using Ebro Data Loggers, first observe the measurement range. If the issue persists, it may be due to a defective sensor, in which case you should call service.
How to fix below measurement range issue in Ebro Data Loggers?
If the Ebro Data Loggers is showing a value below the measurement range, first observe the measurement range. If the issue persists, it might be a sensor defect, and you may need to call service.
The liquid crystal display showing data and status.
Model EBI 20-T measures temperature.
Warnings against using the device in explosive atmospheres or near heat sources.
Precautions regarding microwave radiation and water contact.
Describes the logger's display and its key components.
Recording starts immediately and overwrites oldest data when memory is full.
Recording starts immediately and stops when memory is full.
Recording starts when the START button is pressed.
Recording starts and ends at specific programmed times.
Details the steps to connect to PC, program, and start data recording.
Actions for when measurements exceed or fall below the defined range.
Guidance for dealing with faulty sensors and when to contact service.
Details on how to obtain calibration services to maintain measurement accuracy.
The liquid crystal display showing data and status.
Model EBI 20-T measures temperature.
Warnings against using the device in explosive atmospheres or near heat sources.
Precautions regarding microwave radiation and water contact.
Describes the logger's display and its key components.
Recording starts immediately and overwrites oldest data when memory is full.
Recording starts immediately and stops when memory is full.
Recording starts when the START button is pressed.
Recording starts and ends at specific programmed times.
Details the steps to connect to PC, program, and start data recording.
Actions for when measurements exceed or fall below the defined range.
Guidance for dealing with faulty sensors and when to contact service.
Details on how to obtain calibration services to maintain measurement accuracy.
General| Accuracy | ±0.5°C |
|---|---|
| Battery Life | Up to 2 years |
| Protection Class | IP65 |
| Resolution | 0.1°C |
| Sensor | NTC |
| Measurement Parameters | Temperature |
| Humidity Range | Not applicable |
| Accuracy (Humidity) | Not applicable |
| Resolution (Humidity) | Not applicable |
| Interface | USB |
| Temperature Range | -30°C to +60°C |
| Weight | Approx. 45 g |
| Operating Conditions | -30 °C to +60 °C (-22 °F to +140 °F) |
To Next Page
