English Français
09/2016 ba80118def01_FOM330 25
Deleting the saved values: CLR
In this menu item, you can reset the val-
ues in a memory location to the factory
default settings.
Factory settings:
OFSET = 0 %
GAIN = 1.0
LIM 1 = 18,5 %
LIM 2 = 24 %
This menu option has no settings. It is
simply activated, setting back the set-
tings. Activate it using the MENU-button.
Easy Check: ECH
EasyCheck is a quick functional check of
the device. It does not replace a calibra-
tion, but can be performed anywhere, any
time.
HINT: to perform the EasyCheck, the refe-
rence oil CO 330 is required. It can be
purchased separately.
Please follow the instructions of the refe-
rence oil CO 330 to perform the Easy-
Check.
Ther result is „OK“ for passed or „NOK“ for
not passed.
Suppression de la valeur de mémoire:
CLR
Vous pouvez restaurer ici les valeurs usine
d’un emplacement mémoire.
Réglages usine:
OFSET = 0 %
GAIN = 1.0
LIM 1 = 18,5 %
LIM 2 = 24 %
This menu option has no settings. It is
simply activated, setting back the set-
tings. Activate it using the MENU-button
Easy Check: ECH
EasyCheck is a quick functional check of
the device. It does not replace a calibra-
tion, but can be performed anywhere, any
time.
HINT: to perform the EasyCheck, the refe-
rence oil CO 330 is required. It can be
purchased separately.
Please follow the instructions of the refe-
rence oil CO 330 to perform the Easy-
Check.
Ther result is „OK“ for passed or „NOK“ for
not passed.
To Next Page
Loading...
