EasyManua.ls Logo

EBS AVA PRO CPX300W - Page 6

EBS AVA PRO CPX300W
23 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
AVA PRO - Assembly instructions for the CPX300W alarm control panel 6 / 23
5. Applications with which the device works:
EBS Config 2.0 in the desktop version - a computer program for installers used to configure
the system,
EBS Config 2.0 in the smartphone version - a mobile application for installers used to configure
the system,
EBS Security - a mobile application for users to manage the system.
6. Inputs:
8 surge protected wire lines,
TEOL configuration can be increased up to 16 wire lines,
7 types of wired lines (NO / NC / EOL-NO / EOL-NC / DEOL-NO / DEOL-NC / TEOL),
64 wireless lines (for wireless device data communication),
15 types of reactions.
7. Outputs:
3 low-current wire outputs 100 mA rated,
1 high-current wired output 1.1A current rated,
7 functions.
8. Power outputs:
2 13.8 V power outputs (AUX1 +, AUX2 +),
Power line rating: 350 mA,
Overcurrent and overvoltage-protected
9. Users:
1 administrator,
31 users,
2 categories.
10. Configuration:
Local using EBS programmers,
Remote via GPRS, SMS, Ethernet / Wi-Fi.
11. Programmers:
MINI-PROG-BT - a programmer that allows configuration and monitoring of the control panel
thanks to the IDC10 connector and Bluetooth technology.
GD-PROG - a programmer that has an RS232 connector to a computer and an IDC10
connector for configuring and monitoring the control panel status using the EBS Config 2.0
program.
SP-PROG - a programmer in two variants:
o SP-PROG, having an RS232 connector for connection to a computer and USB for
configuring and monitoring the control panel status using the EBS Config 2.0 program.
o SP-PROG-BT, having a micro USB connector, RS232 and a built-in Bluetooth module. For
cable connection, the situation is the same as for SP-PROG. For Bluetooth technology,
both at the Configuration port and the Information port position, the same port for
communication must be set.
12. Additional information:
4 partitions
1 keypad is used to manage 1 partition,
Up to 8 KP3W keypad can be added to the system,
Multiple keyboards can be added to 1 partition,
Up to 8 PIR-CAM-30 motion detectors with camera can be added to the system,
Up to 8 BM8000PLx-C3W wireless siren can be added to the system,

Related product manuals