4
Show content introduction
3.1 Headlight The instrument can be manually turned on and the
brightness of the sensing environment is automatically turned on(light sensitivity support
is required).
3.2 Battery power display BATTERY
3.3 Multifunctional display area
Total mileage ODO, single mileage TRIP A, single mileage TRIP B, battery current
voltage VOL, current operating current CUR, remaining mileage RM; Instrument boot time
TM
3.4 Vehicle mode
Walk boost mode; Cruise: constant speed cruise mode; PAS: Power file position: 0 ~ 9
adjustable;
3.5 Speed display area
Maximum speed MAX, average speed AVG
Unit MPH, KM/H
The meter will calculate the true speed based on the wheel diameter and signal data
3.6Vehicle Status Display Area
Vehicle Status Code Meaning：
Communication reception failure
Communication dispatch failure
To Next Page
Loading...