6
P18: Display speed ratio adjustment range: 50 % ~ 150 %,
P19: 0 power bit, 0: 0, 1: does not include 0
P20 :0:2 Protocol 1:5 S Protocol 2: Standby 3: Standby
四、
Key Introduction
：
Press the button to use the brief
Key operation is divided into short press and long press, and combination key length
press
Short press is used for rapid/frequent operations, such as the specific key combination
position as follows
1. When riding, you need to modify the power/speed file, short press
2. Toggle display data for multi-function areas during cycling, short click
Single key length is mainly used to switch the mode / switch state
Composite keys(long presses) are used to set parameters because the operation is
complex, which can reduce errors
(Short press does not make the composite key, because it is easy to trigger mistakenly, so
it is too difficult to do）
Specific operational explanations:
一，modify the power ratio / power file
Let's say the current is power mode.
1） Short press ， Help + 1
2） Short press ， Help - 1
二，Toggle speed display
Long press, + Toggle speed display
三，
Set / Disable 6Km/h Cruise, Switch Headlight, ODO Clear Zero
Static state of vehicles，long press
，
Will enter 6KM/h cruise mode, let go of cruise
mode;long press Turn the lights on and off
；
P16Menu Interface
，
long press five seconds
，
ODO clear zero
。
To Next Page
Loading...