© Copyright EC Line 2020 – Internal Use
Instructions for Assembly and Disassembly the VFD – VP-1100 ~ 0 ~
EC Line
EC-VP-1100 POS Terminal
Instructions for Assembly / Disassembly of VFD
The information in this manual contains only essential hardware concerns for general user and
subject to change without further notice. EC Line reserves all the right to alter product designs,
layouts or drivers without announcement. The users shall provide substantial notices and
arrangement for special options operating this product. The user may find the most updated
information of the hardware at http://www.ecline.com.hk
. All the data should be backed-up prior to
the installation of any drive unit or storage peripheral. EC Line will not be responsible for any loss
of data resulting from the use, disuse or misuse of this or any other EC Line product. All rights are
strictly reserved. No part of this documentation may be duplicated, stored in a retrieval system, or
transmitted in any form or by any means, electronic, mechanical, photocopying, or otherwise,
without prior express written consent from EC Line as the publisher of this documentation.
CAUTION
Make sure turn off the POS Terminal before Assembly or Disassembly any device.
It may cause short circuit
terminal or VFD if
install / uninstall
the VFD when the machine turns on
To Next Page
Need help?
General
