Need help?Do you have a question about the EC POWER XRGI 6 and is the answer not in the manual?
General safety and warning instructions to be observed during installation.
Explains CAUTION and WARNING symbols indicating potential hazards.
Defines the proper and improper use of the XRGI® system and potential risks.
Step-by-step procedure in case of a gas smell.
Actions to take in the event of fire or water ingress.
Procedure to follow if exhaust gas is detected.
Warnings about contact with hot or electrically conductive parts.
Emphasizes that only skilled electricians should work on electrical systems.
Lists safety devices like main switch disconnector and sound insulation.
Identifies warning labels for hot surfaces, hot liquid, and voltage.
Instructions for connecting the Q-Heat Distributor to the Power Unit.
Describes connecting the primary circuit flow and return lines.
Instructions for connecting the Q-Heat Distributor to storage/consumer networks.
Describes connecting the secondary circuit flow and return lines.
Hydraulic connection and installation guidelines for the EC POWER storage tank.
Guidelines for discharging exhaust gases from the Power Unit.
Safety and procedural guidelines for gas side installation.
Steps for connecting the gas hose to the Power Unit.
Overview of electrical connection requirements for system components.
Electrical connection details for the Power Unit.
Electrical connection requirements for the Q-Heat Distributor.
Electrical supply and connection details for the iQ-Control Panel.
General| Brand | EC POWER |
|---|---|
| Model | XRGI 6 |
| Category | Industrial Equipment |
| Language | English |
To Next Page
