To Next PageTo Next Page
Need help?Do you have a question about the ECG CX-920A and is the answer not in the manual?
General| Model | CX-920A |
|---|---|
| Type | Electrocardiograph |
| Channels | 3 channels |
| Display | LCD display |
| Power Supply | rechargeable battery |
| Interface | USB |
| Sensitivity | 5, 10, 20 mm/mV selectable |
| Recording Speed | 5, 10, 12.5, 25, 50 mm/s |
| Filters | EMG filter, AC filter |
| Safety Standard | IEC 60601-1 |
Details the 9 capacitance measurement ranges, their respective resolutions, and accuracy specifications.
Essential safety guidelines: observe polarity, discharge capacitors, avoid voltage on connectors, and do not short leads.
Step-by-step instructions for performing capacitance measurements, including lead connection and reading the display.
Detailed steps for calibrating the meter, including setting the range, adjusting zero, and using a standard capacitor.
Instructions for safely replacing the 9V battery, emphasizing disconnection from circuits and polarity.
