ECG FT 15a - Product Operation and Maintenance; Installation and Initial Setup; Fan Usage and Speed Control; Cleaning and Care Procedures

English English
5
Make sure that the power cable or extension cord can not be
accidentally pulled out of the socket during operation.
Use the handle to carry the appliance.
Do not immerse in water!
Warning:
To prevent overheating, do not cover the fan.
DANGER FOR CHILDREN: Children may not play with the packaging
material. Do not let children play with the
plastic bags. Risk of suocation.
Installation
1. Put the front and rear grilles together and secure everything with the clamps located on the edges of
the grille.
2. Attach the motor with the fan head to the base using the vertical adjustment nut.
HEAT PROTECTION
Heat protection is activated if an actuating unit is overloaded. The fan switches o automatically. In this case,
contact aprofessional service centre.
USE
The fan 15a has 2 speeds.
By turning the rotary switch, the following speeds can be selected:
0 - Fan is o.
1 - Fan runs at low speed.
2 - Fan runs at ahigher speed.
• The fan head can be set up or down. Loosen the vertical setting nut, adjust the desired angle of the fan
and tighten the nut again.
CLEANING AND MAINTENANCE
1. The fan must be switched o and the cord disconnected from the outlet prior to cleaning.
2. Wipe the surface of the fan with aclean and dry cloth. If the fan is heavily soiled, it can be treated with
acloth or sponge slightly moistened with soapy solution. Then wipe dry thoroughly all parts. Make sure
that no water gets into the motor during cleaning.
3. The front grille can be removed for easier cleaning of the propeller. Release the clamps at the edges of
the grille and remove it. After cleaning, put everything back and secure with clamps.
Warning: Do not attempt to disassemble the propeller.
4. Store the ventilator in adry and clean place away from children.
We recommend to keep the packaging for possible transportation or storage of the fan.
• Protect the appliance from water and high humidity!
• Do not immerse the fan into water!
• Do not use thinner, petrol or other aggressive cleaning agents for cleaning.
• You can use vacuum cleaner with adust nozzle to clean the grilles.