ECG HK 130 ionic - Using the Appliance

28
GB
28
WARNING:
Do not use this appliance near bathtubs, showers,
washbasins or other vessels containing water.
DESCRIPTION
1
24
3
56
1. Button for changing attachments
2. Brush rotation control
3. Power switch and temperature setting
4. Swivelling cord terminal
5. Brush with aluminium tube, Ø38 mm
6. Brush, Ø38 mm
USING THE APPLIANCE
Replacing accessories
ATTENTION! Brushes 5 and 6 become very hot during operation. Be very careful when replacing them!
• Inserting: Press the button 1 and insert the brush, which you want to use. You will hear aclick when
properly installed.
• Removal: Press the button 1 and remove the brush.
Brush with aluminium tube for short hair
• The brush allows for simultaneous drying and styling of hair. You can quickly achieve perfect results. The
brush is equipped with rotation function, which allows you to dry your hair quickly and easily with one
movement – quicker and easier than regular hair drying.
Brush for long hair
• The brush allows for simultaneous drying and styling of hair. You can quickly achieve perfect results. The
brush is equipped with rotation function, which allows you to dry your hair quickly and easily with one
movement – quicker and easier than regular hair drying.
Direction of rotation
This function allows you to wind astrand of hair automatically around the brush and dry it easily with astream
of hot air.
1. If you want to start rotation of the brush, press the control 2 in the required direction.
2. Keep the control pressed while simultaneously drying.
3. If you want to stop the rotation, release the control 2.
WARNING!
Do not turn the brush when the appliance is o or unplugged from the power supply!
Setting the air temperature
Using the switch 3 you can select the air temperature.
0 = O
C = Cold air styling (without brush rotation)
1 = Warm air
2 = Hot air