ECG MTD 231 S - Page 77

GB
76
77
4) Press Start/+30Sec./Confirm to start the cooking process.
Example: To use the “Auto Menu” function for cooking sh weighing 350 g:
1) Turn “
” clockwise until “A-6” is displayed.
2) Conrm by pressing Start/+30Sec./Confirm.
3) Turn “
” and select the weight of the fish (turn until “350” is displayed).
4) Press Start/+30Sec./Confirm to start the cooking process.
Auto Menu Programs Table
Menu Weight (g) Display
A-1
PIZZA
200 g 200
400 g 400
A-2
MEAT
250 g 250
350 g 350
450 g 450
A-3
VEGETABLE
200 g 200
300 g 300
400 g 400
A-4
PASTA
50 g (with 450 ml of cold water) 50
100 g (with 800 ml of cold water) 100
A-5
POTATO
200 g 200
400 g 400
600 g 600
A-6
FISH
250 g 250
350 g 350
450 g 450
A-7
BEVERAGE
1 cup (120 ml) 1
2 cups (240 ml) 2
3 cups (360 ml) 3
A-8
POPCORN
50 g 50
85 g 85
100 g 100
8. Multi-phase food preparation
Up to 2 dierent food preparation phases can be entered. If defrosting is part of the preparation, it should be set as the rst phase.
Example: If you intend to defrost for 5 minutes and cook for 7 minutes at a power of 80 %, perform the following steps:
1) Press Weight/Time Defrost twice and “dEF2” will appear on the display.
2) Use “
” to set the defrosting time to 5 minutes (turn until “5:00” is displayed).
3) Press Microwave once. “P100” is displayed.
4) Press Microwave again or turn “
” to set the microwave power to 80 %.
5) Conrm by pressing Start/+30Sec./Confirm. “P80” is displayed.
6) Use “
” to set the cooking time to 7 minutes (turn until “07:00” is displayed).
7) Press Start/+30Sec./Confirm to start the food preparation process. A beep sounds for the rst phase and a countdown starts for the
defrosting period. Another beep sounds between phases. Five beeps sound after the food is cooked (all phases are done).
MTD 231 S_manual_cz_sk_pl_hu_de_en_fr_it_es.indb 77 27.08.2018 11:48:38