ECG MTD 231 S - Quick Start; Defrosting According to Weight; Defrosting According to Time; Kitchen Timer

GB
76
77
Time set Dial step
0–1 min : 5 s
1–5 min : 10 s
5–10 min : 30 s
10–30 min : 1 min
30–95 min : 5 min
Cooking power table
Cooking power 100% 80% 50% 30% 10%
Display P100 P80 P50 P30 P10
3. Quick start
1) Pressing Start/+30Sec./Confirm in idle mode starts cooking at 100 % power, each additional push of the button extends the cooking
time by another 30 seconds up to a maximum time of 95 minutes.
2) When microwave cooking or defrosting, these processes can be extended by another 30 seconds with each push of Start/+30Sec./
Confirm.
3) While in idle mode, turn “
” to the left to set the cooking time with 100% power and press Start/+30Sec./Confirm to start the
cooking process.
4. Defrosting according to weight
1) Press Weight/Time Defrost once, “dEF1” will appear on the display.
2) Turn “
” to set the weight of the food between 100 to 2000 g.
3) Press Start/+30Sec./Confirm to start the defrosting process.
5. Defrosting according to time
1) Press Weight/Time Defrost twice, “dEF2” will appear on the display.
2) Set the defrosting duration by turning “
” (maximum setting is 95 minutes).
3) Press Start/+30Sec./Confirm to start the defrosting process. The cooking power for defrosting is P30 and may not be changed.
6. Kitchen timer
1) Press Clock/Timer twice. 00:00 will appear on the display and the timer indicator lights up.
2) Use “
” to enter the countdown time (maximum setting is 95 minutes).
3) Press Start/+30Sec./Confirm to conrm the setting, the timer indicator will be on.
4) After the time lapses, the timer indicator will go o and a ve beeps will sound. If the time is set on the appliance, the display will
return to the showing the current time.
Note: During the kitchen timer sequence, the countdown is shown and not the current time.
7. Automatic programs - Auto menu
1) Turn “ ” to the right and select the desired program. Programs are displayed as “A-1” through “A-8”.
2) Conrm by pressing Start/+30Sec./Confirm.
3) Turn “
” and select the default weight, see the following table listing the programs.
MTD 231 S_manual_cz_sk_pl_hu_de_en_fr_it_es.indb 76 27.08.2018 11:48:38