Need help?Do you have a question about the Echanfit CRW4106 and is the answer not in the manual?
Attaches the front foot tube frame to the main frame using bolts, washers, and spring washers.
Secures the rear foot tube frame to the slide tube frame using bolts, flat washers, and spring washers.
Installs the seat cushion into the slide tube frame.
Locks the slide tube frame to the main frame and screws the cushion pad into the main frame.
Attaches the foot pedals to the foot pedal tube assembly with bolts, flat washers, and lock nuts.
Secures the foot pedal tube assembly to the main frame using bolts, spring washers, and flat washers.
Inserts sensor cables into the computer bracket and secures with a screw.
Installs the computer up cover, inserts dry batteries, and connects sensor cables.
Adjusts the resistance knob clockwise to increase and counter-clockwise to decrease resistance.
Adjusts the rear foot cover to level the frame on uneven ground.
Explains the MODE button's functions, including clearing all data.
Details using SCAN, TIME, COUNT, CALORIE, TOTAL COUNT, and REPS/MIN functions.
Outlines scanning intervals, time, counts, calories, battery, and temperature specifications.
To Next Page
General