SLTA-10 Adapter User’s Guide 4
Content
This manual provides detailed information about the hardware and software for the SLTA-10
Adapter.
• Chapter 1 introduces the SLTA-10 Adapter and provides a quick overview.
• Chapter 2 describes the SLTA-10 Adapter hardware.
• Chapter 3 describes how to attach an SLTA-10 Adapter.
• Chapter 4 describes the configuration switches of the SLTA-10 Adapter.
• Chapter 5 describes the software for the SLTA-10 NSI mode.
• Chapter 6 describes the software for the SLTA-10 MIP mode.
• Chapter 7 discusses using the Windows
®
NT
TM
network driver and the SLTALink Manager
software with the SLTA-10 NSI mode.
• Chapter 8 discusses using the DOS network driver with the SLTA-10 MIP mode.
• Chapter 9 discusses creating an SLTA-10 MIP mode network driver for any host.
• Chapter 10 describes initilization and installing as a node.
• Chapter 11 discusses using an SLTA-10 Adapter with a modem.
• Chapter 12 describes the DOS Host Connect Utility (HCU) for use with the SLTA-10 MIP
mode.
• Chapter 13 is a troubleshooting section.
• Appendix A describes the Windows 3.1x DLL files for use with the SLTA-10 Adapter.
To Next Page
Loading...