Need help?Do you have a question about the Echo AUDIOFIRE 12 and is the answer not in the manual?
General| Type | Audio Interface |
|---|---|
| Connectivity | FireWire |
| Simultaneous I/O | 12 in / 12 out |
| Sample Rates | 44.1, 48, 88.2, 96 kHz |
| Channels | 12 |
| Inputs | 12 |
| Outputs | 12 |
| Sample Rate | Up to 96 kHz |
| Bit Depth | 24-bit |
| Phantom Power | No |
| Digital Inputs | ADAT |
| Digital Outputs | ADAT |
| Dimensions | 19" x 1U |
| Analog Inputs | 12 x 1/4" TRS Line |
| Analog Outputs | 12 x 1/4" TRS Line |
Covers reading instructions, retaining manuals, heeding warnings, moisture, and heat avoidance.
Details power sources, grounding, cord protection, and servicing safety.
Procedures for handling product damage and when to refer to a technician.
Outlines product warranty, service procedures, disclaimers, and liability limits.
Specifies necessary hardware and software for AudioFire operation.
Covers administrator login, OS version check, and software updates.
Step-by-step instructions for installing the AudioFire hardware and console.
Details analog inputs and outputs for AudioFire 2, 4, 8, and 12 models.
Covers S/PDIF, MIDI, FireWire, and Word Clock interfaces for connectivity.
Configuring AudioFire in macOS Sound Preferences and Audio MIDI Setup.
Guide to installing, authorizing, launching, and configuring Tracktion audio.
Explains running the console, window layout, bus selection, and input/output controls.
Covers volume, levels, settings tab, and stand-alone mode functionality.
Details synchronizing devices and using multiple AudioFires together effectively.
Information for Echo hardware and Mackie Tracktion software support.
Addresses common problems with installation, recognition, and software conflicts.
Resolves synchronization, S/PDIF, pitch, and audio artifact problems.
Explains conversion, rates, binary, decibels, and dynamic range.
Details audio performance and hardware specs for AudioFire 2, 4, 8, and 12.
To Next Page
