6 English
FEATURES
Know Your Lawn Mower
See Figure 1.
The safe use of this product requires an understanding of the
information on the product and in this operator’s manual as
well as a knowledge of the project you are attempting. Before
use of this product, familiarize yourself with all operating
features and safety rules.
Battery Cover
The battery cover protects the battery port from moisture
and debris.
Brushless Motor
This product features a brushless motor that maximizes
power and performance as well as battery run time.
Dual Battery Ports
This product features dual battery ports to minimize down
time during operation. To switch from one battery to the
other, simply reverse the arrow direction on the selector key.
Grass Bag
The grass bag collects grass clippings and prevents them
from being discharged across your lawn as you mow.
Height Adjustment Levers
Use the wheel height adjustment levers to adjust the cutting
height.
Mulching Plug
Your mower is equipped with a mulching plug that covers
the rear discharge opening, which allows the mower blade
to cut and recut for finer clippings.
Start Button and Blade Control Lever
The start button and blade control lever, located on the upper
handle, are used to start the mower.
Start Key
The start key must be inserted before the mower can be
started.
SYMBOLS
Some of the following symbols may be used on this product. Please study them and learn their meaning. Proper
interpretation of these symbols will allow you to operate the product better and safer.
Symbol Name Designation/Explanation
Recycle Symbol
This product uses lithium-ion (Li-ion) batteries. Local, state, or federal
laws may prohibit disposal of batteries in ordinary trash. Consult your
local waste authority for information regarding available recycling and/
or disposal options.
Direct Current Type or a characteristic of current
n
o
No Load Speed Rotational speed, at no load
.../min Per Minute Revolutions, strokes, surface speed, orbits etc., per minute
V Volts Voltage
Hz Hertz Frequency (cycles per second)
min Minutes Time
Product Specifications
Motor ...................................................................................................................................................................... 58 Volt DC
Cutting Path ....................................................................................................................................................................21 in.
Height Adjustments ............................................................................................................................................3/4 in. to 4 in.
Wheel Size .........................................................................................................................................................................9 in.
To Next Page
Loading...
Need help?
General
