16
Operation
Fuel and lubricant
Fuel is a mixture of regular grade petrol and an air-cooled 2-stroke engine oil of reputable
brand name.
Minimum 89 Octane unleaded petrol is recommended.
Do not use fuel containing methyl alcohol or more than 10 % of ethyl alcohol.
Recommended mixture ratio; 50 : 1 (2 %) for ISO-L-EGD Standard (ISO/CD13738), JASO
FC, FD grade and ECHO Premium 50 : 1 oil.
- Do not mix directly in engine fuel tank.
- Avoid spilling petrol or oil.
Spilled fuel should always be wiped up.
- Handle petrol with care, it is highly inflammable.
- Always store fuel in approved container.
Chain lubricant
Proper lubrication of the chain while in operation reduces the friction between the chain and
the guide bar to a minimum and assures a longer life time.
Use only special chain oil of high quality for this purpose.
Do not use any waste or reclaimed oil to avoid various problems with the oil pump.
In case of emergency, it is allowed to use motor oil for a short time.
SAE 30...in summer
SAE 10...in winter or for the cutting of wood with a high resin content
Cap indication
Fuel and oil tanks are indicated by the following illustrations.
Fuel tank cap
Chain oil tank cap
CAUTION
Whenever opening up the fuel tank, always loosen the cap very slowly and wait for
the tank pressure to be equalized before removing the cap.
To Next Page
Loading...
Need help?
General
