Echo CS-305, CS-306 - Compatible Chain & Bar Combinations

21
*Reduced nose radius symmetrical bars (OREGON name — Double Guard)
WARNING DANGER
Use of replacement saw chain and/or guide bar other than that specified, or operation without the “tip guard” in place, may
cause severe kickback resulting in serious injury.
Only use saw chain designated as, “LOW-KICKBACK,” that meets the ANSI B175.1-2000 Standard, and the Echo guide
bar specified.
IMPORTANT
Chain and guide bar gauge size must be identical. Use Bar/Chain combinations shown in table
above.
IMPORTANT
If your kick guard is damaged or lost, contact your Echo dealer for a replacement. For the
name of the Echo dealer nearest you, Call: 1-800-432-ECHO (3246) or on the web at www.echo-
usa.com.
Refer to your Chain Saw Safety Manual for kick guard application information.
LEDOM
RAB
HTGNEL
ELBUOD
RABDRAUG
NIAHCWAS
KCIK
DRAUG
N/POHCE
)N/PMEO(
OHCE
.ONTRAP
SKNILEPYTHCTIPEGUAG
OHCE
.ONTRAP
503
-SC
603-SC
"215473DC4A21
54-GS09
5407091
54
GS09"8/3340.
1094982
94982
"412573DC4A41
25-GS09
2507091
25
CHAIN AND GUIDE BAR COMBINATIONS
The following combinations may be used on CS-305 and CS-306.