DLM-2100SP
9992220573328
© 08/2021 ECHO Incorporated
MAINTENANCE
Replace The Blade
Use only approved replacement blades.
Wear heavy gloves or wind cloth around the blade when you
touch the blade.
1. Stop the machine.
2. Make sure that the blade fully stops.
3. Remove the safety key and batteries.
4. Turn the machine to its side.
5. Use a piece of wood or special
lawnmower blade holding tool to
prevent the movement of the blade.
6. Remove the mounting bolt (26)
and spacer (25) with a wrench or
socket.
7. Remove the blade (24).
8. Install the new blade. Make sure
the arrows on the fan engage the
holes on the blade.
9. Put in the mounting bolt and spacer
and tighten them. Recommended
tightening torque: 33-37 Nm.
24
25
26
To Next Page
Loading...
