5
WARNING
BEFORE DRILLING, BE SURE TO READ AND
UNDERSTAND THE ENTIRE OPERATOR’S
MANUAL TO AVOID THE CHANCE OF
SERIOUS INJURY.
• Do not force the drills and only move as
quickly as the drills will allow.
• Stop the engine and disconnect from ignition
cable before: - cleaning or when clearing a
blockage; checking, maintenance or working
on the machine.
• Handle fuel with care; it is highly flammable.
Never add fuel to a machine with a running or
hot engine.
• Do not attempt to repair the machine unless
you are qualified to do so.
• Do not operate the machine with a damaged or
excessively worn drill bit.
• Always ensure all handles and guards are
fitted when using the machine. Never attempt
to use an incomplete machine or one fitted with
an unauthorized modification.
• When starting to drill, run the engine at full
throttle.
• When transporting or storing the machine
always remove the drill bit.
• To reduce fire hazard keep engine and silencer
free of debris, leaves or excessive grease.
• Handle drill with care, contacting with drills
may cause injury.
OPERATING TECHNIQUES
To Next Page
