Installing Memory Card Charging the Battery
Your phone takes a MicroSD memory card of up
to 32 GB.
Insert the microSD memory card following the
diagram below.
A flashing red light indicates that the battery level
is very low: the battery should be recharged
because, if the level is too low, it may shorten the
life of the battery.
Connect the charger to a power outlet and the
micro USB connector to the phone’s USB port. The
phone’s status indicator changes to red, indicating
that the device is charging.
Once the phone has finished charging, the
status indicator changes to green and you should
unplug the charger.
For more information, refer to the Safety Informa-
tion section.
To Next Page
Loading...
