EasyManua.ls Logo

Echo GT-200R - SERIAL NUMBER 07003101-07999999

Echo GT-200R - SERIAL NUMBER 07003101-07999999
24 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
Grass Trimmer
Operator's Manual
MODEL GT-200R
Serial Number 07003101 - 07999999
WARNING DANGER
Read rules for safe operation and instructions carefully. ECHO provides an
Operator's Manual and a Safety Manual. Both must be read and understood for
proper and safe operation.
X770000702
11/03
X7702277302

Questions and Answers:

Echo GT-200R - SERIAL NUMBER 07003101-07999999 Specifications

General IconGeneral
BrandEcho
ModelGT-200R - SERIAL NUMBER 07003101-07999999
CategoryTrimmer
LanguageEnglish

Summary

Introduction and Manuals

Operators Manual Overview

Information for operation, starting, stopping, maintenance, storage, and assembly specific to this product.

Safety Manual Overview

Explains possible hazards and safety measures for using grass trimmers and brush cutters.

Safety Symbols and Decals

Important Safety Symbols

Explanation of symbols like IMPORTANT and NOTE for unit protection and tips.

Safety Decal Identification

Locate and understand safety decals on the unit for proper operation and safety.

Hot Surface Warning Decal

Indicates the muffler or surrounding cover can become extremely hot.

Shaft Decal and International Symbols

Shaft Decal Warnings

Important safety warnings displayed on the shaft of the unit.

International Safety Symbols

Explanation of universal symbols used for operator safety and unit operation.

General Safety Instructions

Personal Condition and Safety Equipment

Guidance on physical condition, eye, hand, hearing protection, and proper clothing.

Extended Operation and Extreme Conditions

Precautions for vibration, cold exposure, and repetitive stress injuries.

Equipment and Safe Operation

Equipment Checks and Safety

Ensuring unit is in safe operating condition and using approved attachments.

Safe Operation Guidelines

Guidelines for safe operation, including work area clearance and proper stance.

Emission Control and Product Description

Emission Control Information

Details on EPA Phase 2 emission compliance and durability period.

Product Description and Contents

Overview of the partially assembled product and list of included contents.

Product Components Identification

Engine, Drivetrain, and Accessories

Engine, fuel system, drive shaft, muffler, and other engine-related parts.

User Interface and Cutting Components

Handles, controls, trimmer head, and safety shield.

Safety Information Resources

Information on the optional safety video and its purpose.

Product Specifications

General and Engine Specifications

Model, dimensions, weight, engine type, bore, stroke, displacement, performance.

Fuel, Oil, Drive, and Attachment Specs

Fuel/oil requirements, capacity, clutch, drive shaft, and cutter head details.

Important Compliance Notes

Spark ignition system compliance with Canadian ICES-002.

Assembly Instructions

Required Tools and Parts for Assembly

Lists tools and parts needed for assembly, including safety warnings.

Plastic Shield Installation Procedure

Step-by-step instructions for attaching the plastic debris shield.

Nylon Line Head Installation

Instructions for installing the nylon line head and securing it with a locknut.

Nylon Line and Handle Setup

Nylon Line Replacement Procedure

Instructions for removing old line and threading new trimmer line into the head.

Front Handle Adjustment

Guidance on repositioning and tightening the front handle for optimal operating position.

Pre-Operation Fueling Procedures

Fuel Requirements and Mixing Instructions

Details gasoline and two-stroke oil requirements and proper mixing instructions.

Safe Fuel Handling Practices

Critical safety warnings and precautions for handling flammable fuel.

Fuel Storage and Unit Storage

Recommendations for storing fuel and the unit with fuel.

Engine Operation

Starting a Cold Engine

Step-by-step instructions for starting the engine from a cold state.

Starting a Warm Engine

Steps for starting the engine when it is already warm, omitting choke use.

Stopping the Engine

Procedure for safely shutting off the engine using the stop switch.

Maintenance Procedures

Maintenance Skill Level Guidelines

Defines skill levels (1, 2, 3) for performing maintenance tasks.

Maintenance Intervals and Tasks

Table detailing maintenance procedures, frequency, and required skill levels.

Engine Component Maintenance

Air Filter Cleaning and Replacement

Instructions and parts for servicing the air filter element.

Fuel Filter Replacement

Procedure for removing and installing a new fuel filter.

Engine System Maintenance

Spark Plug Inspection and Service

Steps for checking, cleaning, gapping, and replacing the spark plug.

Cooling System Cleaning

Instructions for cleaning engine fins and air intakes to maintain airflow.

Exhaust System Maintenance

Spark Arrestor Screen Service

Procedure for cleaning or replacing the spark arrestor screen in the muffler.

Carburetor and Cylinder Maintenance

Cylinder Exhaust Port Cleaning

Recommends dealer service for cleaning carbon from the exhaust port.

Carburetor Idle Speed Adjustment

How to adjust idle speed using the idle speed screw.

Lubrication Procedures

Drive Shaft Lubrication

Instructions for lubricating the flexible drive shaft and gear case.

Troubleshooting Engine Problems

Engine Cranks But Wont Start

Diagnosing and resolving issues when the engine cranks but doesn't start.

Engine Runs Poorly or Dies

Troubleshooting issues with the engine running poorly or stopping.

Engine Does Not Crank

Diagnosing why the engine fails to crank or start at all.

Storage Guidelines

Long Term Storage Preparation

Steps for preparing the unit for storage longer than 30 days.

Servicing Information and Support

Parts and Authorized Service Dealers

Information on obtaining genuine ECHO parts and authorized service dealers.

Consumer Product Support Contact

Contact information for customer assistance and product questions.

Manuals and Safety Videos Availability

How to obtain additional operator manuals and safety videos.

Related product manuals