Console - Mia
42
Console - Mia
Menus
You can set your S/PDIF output format by selecting File/Preferences. This
lets you configure your card for professional or consumer format S/PDIF
output. Some S/PDIF devices need to see one format or another. If you are
having trouble connecting a S/PDIF device to the digital output of your
Echo card, try changing this setting.
The “Active Card” menu is used when you have more than one Mia; use this
menu to switch between the different cards.
Shortcuts
Shift-drag: Holding down the Shift key and dragging a fader will invert the
current gang state. If a fader is ganged, shift-dragging will treat the fader
as if it were unganged and vice versa.
Quick 0 dB: Holding down the Command key and clicking on a fader will
set that fader to 0 dB.
Center pan: Holding down the Command key and clicking on a pan slider
will set the slider to the center position.
To Next Page
Loading...