13
S
HRED
'N' V
AC
®
O
PERATOR
'
S
M
ANUAL
4. Remove blower pipe assembly from unit.
5. Align grooves in vacuum elbow with pegs on blower housing and
install vacuum elbow.
6. Turn vacuum elbow clockwise to lock it into place.
7. Place debris bag opening over end of vacuum elbow and secure
with velcro strap (E).
8. Place shoulder harness over right shoulder.
9. Firmly grip top handle with left hand and side handle with right
hand.
10. Keep unit to your right side.
11. Make sure bevel at end of tube faces downward.
E
To Next Page
Loading...
