To Next PageTo Next Page
Need help?Do you have a question about the Echo 77412 and is the answer not in the manual?
Instructions for completing and sending the warranty card to register your machine and start coverage.
Guidance on how to order replacement parts, including necessary information like serial number.
Information on where to find and record the machine's serial number for service.
Provides phone numbers and email addresses for customer support and service inquiries.
Explains the duration and conditions of the product warranty for material and workmanship.
Lists items and conditions not covered by the warranty, such as wear items or misuse.
Details regulatory requirements for spark arresters in California and other states.
Explains the meaning of hazard symbols: Danger, Warning, and Caution.
Essential safety precautions and checks to perform before starting the machine.
Critical safety rules for operating the chipper to prevent injury and damage.
Specific safety guidelines for operating chippers connected to a tractor's PTO.
Safety precautions for handling and charging batteries on electric start models.
Safety procedures to follow during maintenance, service, and storage of the chipper.
Guidelines and precautions for safely towing the chipper.
Identifies various safety decals and their importance for safe operation.
Diagrams indicating the placement of safety decals on different chipper models.
Step-by-step guide for assembling the trailer for 342CC engine models.
Step-by-step guide for assembling the trailer for 390CC engine models.
Instructions for connecting and installing the trailer lights on 390CC models.
Procedures for attaching the hitch channel, coupler, and safety chains.
Steps for installing the discharge cap and optional discharge tube.
Instructions for attaching the chipper chute to the housing.
Steps for installing the chute extension tray and hinge.
Guide for installing the battery on 342CC engine models, including specifications.
Procedures for checking and adding motor oil to the engine.
Instructions on safely filling the fuel tank with approved gasoline types.
Steps for connecting the driveline to the tractor PTO and chipper rotor shaft.
Overview of controls for chippers powered by an engine.
Identification and function of key components like hitch, jack stand, and chute.
Details on choke, throttle, fuel cut-off, and starter for engine models.
Controls specific to chippers that are powered by a tractor's PTO.
Step-by-step instructions for starting electric, recoil, and PTO models.
Instructions for safely stopping the engine and chipper rotor.
Guidelines for feeding material and operating the chipper effectively.
Procedures for safely connecting and disconnecting the chipper from a towing vehicle.
A table outlining required maintenance tasks and their recommended frequency.
Procedure for installing a lock mechanism on the chipper disk for safe servicing.
Information on chipper blade condition, signs of dullness, and when to service.
Detailed instructions on how to properly sharpen the chipper blades.
Procedure for adjusting the gap between the chipper blades and the anvil.
Instructions for adjusting the tension of the drive belt.
Steps for replacing the drive belt on engine and PTO models.
Detailed procedure for removing and replacing the chipper's rotor bearings.
Recommendations for checking wheel bolts, tire pressure, and bearings.
Safe procedure for removing debris from a plugged chipper disk.
Instructions for lubricating various bearings and pivots on the chipper.
Specific greasing points and quantities for engine-driven models.
Specific greasing points and quantities for PTO-driven models.
A chart to diagnose and resolve common problems with the chipper.
Technical dimensions, capacity, weight, and engine details for various models.
Reference tables for torque values of English and Metric bolts.
Statement of compliance with EU directives for chipper model 77413.
Statement of compliance with EU directives for chipper model 77412E.
Statement of compliance with EU directives for chipper model 77412.
Statement of compliance with EU directives for chipper model 77454.
General
