Echo BEARCAT sc3206

OWNER'S MANUAL
Manual P/N 14846-00
Rev. 021308
Companion to P/N 14849-00
SN Range: 705134 - A08786
VIN Range: 5VJAA00137W000009 - 5VJAA0012AW002577
3 INCH
CHIPPER/SHREDDER
SC3206 (70050) - B&S 205 cc
SC3305 (70080) - B&S 305 cc
SC3305E (70085) - B&S 305 cc Elec
SC3240 (70380) - HONDA 240 cc
SC3240T (70580) - HONDA 240 cc Tow
SC3342 (75311) - B&S 342 cc
SC3270 - HONDA 270 cc
SC3270T - HONDA 270 cc TOW
ENGLISH ESPAÑOL FRANÇAIS

Echo BEARCAT sc3206 Specifications

General

Brand	Echo
Model	BEARCAT sc3206
Category	Chipper
Language	English

Summary

Before You Begin

Submit Warranty Card

Instructions on submitting the warranty card to register the machine.

Service, Parts, and Contact

Information on obtaining service, parts, machine identification, and contact details.

Limited Warranty Information

Warranty Terms and Conditions

Details warranty coverage, exclusions, and owner responsibilities for the product.

Warranty Voidance Requirements

Conditions that will void the warranty, including timely registration.

Safety Guidelines

Hazard Identification and Warnings

Explains hazard symbols (Danger, Warning, Caution) and emission compliance requirements.

Operational Safety Procedures

Essential pre-operation checks and safe practices during machine operation.

Maintenance, Storage, and Battery Safety

Safety for maintenance, storage, towing, and battery handling.

Safety Decal Information

Location and explanation of all safety decals on the machine.

Assembly Instructions

Handle and Hopper Installation

Steps for installing the handle and hopper onto the machine frame.

Fuel and Oil Filling

Procedures for filling the fuel tank and adding engine oil.

Features and Controls Overview

Engagement Handle and Chutes

Explains rotor engagement, shredder chute, and chipper chute functions.

Engine Controls

Details operation of engine throttle, choke, and key switch.

Jack Stand (Towable Models)

Operation of the jack stand for stability on towable models.

Machine Operation

Starting Procedures

Instructions for starting recoil and electric models.

Safe Chipping and Shredding

Best practices for feeding material, chip/shred size, and avoiding jams.

Stopping the Machine

Correct procedure for safely shutting down the chipper/shredder.

Service and Maintenance

Routine Maintenance Schedule

Lists periodic checks and services for optimal machine performance.

Blade and Knife Servicing

Instructions for maintaining chipper blades and shredder knives.

Component Adjustments and Replacement

Adjusting anvil, changing screens, belts, and installing blades.

Rotor Removal and Lubrication

Procedures for rotor removal and machine lubrication.

Troubleshooting Guide

Engine Starting and Stalling Issues

Solutions for common engine starting and stalling problems.

Chipping and Shredding Performance Issues

Addresses problems like poor chipping, overheating, and stalling during use.

Belt and Rotor Issues

Resolves belt squeals, stalling, and material wrapping around the rotor shaft.

Specifications

Model Size Specifications

Detailed dimensions and capacities for various machine models.

Special Torque Requirements

Rotor Plate and Knife Shaft Torque

Specific torque values for rotor plate mounting bolts and knife shaft screws.

General Bolt Torque Specifications

Torque Values by Bolt Size and Grade

Reference table for torque values based on bolt diameter and grade.