6 3 INCH CHIPPER/SHREDDER
Section
ASSEMBLY
2
WARNING
the discharge screen.
1.
2.
1.
handle is located above the engine and the opening
is toward the chipper chute.
2.
Place the chipper chute extension onto the chute. 1.
2.
the chute extension.
Place the discharge weldment onto the chipper. The holes 1.
on the weldment should line up with holes on the chipper.
2.
3.
2.1 INSTALLING THE HANDLE
2.2 INSTALLING THE HOPPER
2.3 INSTALLING THE CHIPPER CHUTE
EXTENSION
2.4 INSTALLING DISCHARGE ASSEMBLY
HANDLE
HOPPER
CHIPPER
EXTENSION
(WHERE AVAILABLE)
DISCHARGE
ASSEMBLY
(WHERE AVAILABLE)
To Next Page
Loading...
