173 INCH CHIPPER/SHREDDER
ENGLISH
Section
TROUBLESHOOTING
6
PROBLEM POSSIBLE CAUSES REMEDY
Engine will not start.
Improper control settings.
Spark plug disconnected. Connect spark plug.
gas.
Internal engine problems.
Engine or rotor stalls or
stops.
Obstructed discharge.
Plugged rotor.
Feeding material too large into
shredder.
Chipper does not chip.
Dull chipper blades. Rotate or sharpen blades.
Drive belts loose or worn.
that are too large.
Broken or missing chipper
blades
Replace blade.
Engine overheats.
Improper oil level.
to chip.
Dull chipper blades. Reverse or sharpen blades.
Obstructed discharge.
Improper blade clearance.
excessive power or stalls.
Obstructed discharge.
Plugged rotor.
Wet or green material will not
discharge.
Engine stalls or belt
clutch.
Plugged rotor.
Belt tension too loose. Replace belt or spring.
Dull chipper blades. Sharpen blades.
Improper blade clearance.
To Next Page
Loading...
Need help?
General
