Echo SRM-2620 - Page 37

To Next Page

To Previous Page

SRM-2620 MAINTENANCE

X7502341701 37

ENGLISH

Nylon Line Head Disassembly Instructions

Note: For normal use, Speed Feed

head disassembly is not

necessary. However, if circumstances require disassembly,

follow these instructions.

1. Press top of locking tabs (A) on

both sides of Speed Feed

head to release cover (B) from

eyelet carrier (C).

2. Remove cover from eyelet

carrier.

Nylon Line Replacement

Wear gloves or personal injury may result:

◆ Cutoff knife is sharp.

◆ Gearcase and surrounding area may be hot.

1. Cut one piece of line to

recommended length.

2.0 mm (0.080 in.) diameter

6 m (20 ft.).

2.4 mm (0.095 in.) diameter

6 m (20 ft.).

2. Align arrows on top of knob with

openings in eyelets.